Product Description
Direct support from the factory Why is DriveMedley worthy of trust?
At DriveMedley, we empower your journey with premium aftermarket parts. “Transform your drive, command your life” isn’t just a slogan; it’s our promise. With direct factory support, we ensure trust and quality for a ride that’s truly yours. Trust in us, steer with confidence.
How does the transmission cooler work?
Tube and fin structure that helps absorb heat from and promote air flow, thus allowing the ATF to cool as it passes through the tube
Dual-material install kit included! 
Standard Installation Accessories
Plastic installation fittings for an effortless setup of your transmission oil cooler. Each package includes a detailed instruction manual, providing you with step-by-step guidance to ensure a smooth installation process.
Update Metal Mounting Kit
New metal installation kit for enhanced durability, ensuring a more secure setup for your transmission cooler. Enjoy the added DIY fun and satisfaction as you improve your vehicle’s performance with ease and precision
Why is a transmission cooler important?
Automatic transmissions generate heat from friction. Keeping fluid below 200°F extends lifespan; above 400°F reduces it to minutes. Coolers protect ATF, prolonging its lifespan.
Tell me the reason why I must buy transmission cooler
No one has ever said “wow my transmission is staying too cool” before
Can my car install this Trans oil cooler?
The push-on size for the transmission oil cooler is 3/8″. Additionally, the accompanying Quick connector/ Adapter fitting has a 1/2”-20 Male/Female thread and fits most vehicles with 5/16” transmission cooler lines.
Which specification of transmission cooler is suitable for my car?
6PASS is very suitable for small to full-size vehicles capable of towing trailers up to 5,000 pounds (approximately 2300KG）
8Pass is suitable for trucks, motorhomes, and SUVs capable of towing trailers up to 10,000 pounds (approximately 4500KG）
TYPES OF INSTALLATION CONNECTION 
IN-SERIES INSTALLATION
The recommended cooler connection is the “in-series” INSTALLATION. It utilizes the existing cooling system and complies with most new car warranties. This method provides maximum cooling by returning the coolest oil directly to the transmission
REPLACEMENT INSTALLATION
This method should be used if the existing cooling system is damaged and repair costs are excessive. The replacement installation may void new car warranties and will provide less total cooling than the “in-series” installation. This application requires an oil cooler one or two sizes larger
RETURN OIL LINE IDENTIFICATION
Start engine while engine is cold.Depress brake pedal, place transmission in drive for no more than 10 secondsStop engineIdentify oil return line by feeling both oil lines (3&4). Coolest line is oil return line 
COOLER INSTALLATION
COOLER INSTALLATION STEP 1&2
Place clamps on ends of hose and push hose onto oil cooler fitting. Using a couple of drops of trans fluid, lubricate the fittings. Leave hose in loop- DO NOT CUT THE HOSE.Position clamps 1/4- 3/8 inch from end of hose. Tighten clamps until rubber protrudes level with clamp slots. DO NOT over tighten clamps 
COOLER INSTALLATION
COOLER INSTALLATION STEP 3&4
If mounting oil cooler behind radiator position #3 , loosen fan shroud. Cut or drill hole in fan shroud for hose clearance.Remove adhesive backing from foam pads, attach pads to oil cooler.
COOLER INSTALLATION
COOLER INSTALLATION STEP 5&6
Position oil cooler in desired mounting location with pads facing radiator or air conditioning condenser . Insert rods through cooler and pads, radiator and/or condenser.Install locking buttons. These are permanent and can only be removed by cutting. Tighten to compress the foam pad. Cut off excess mounting rods.Check the installation after a week to check or tighten the mounting rods and for any leaks
TRANSMISSION COOLER MOUNTING POSITIONS
Transmission Cooler Location
When selecting the best location for your vehicle, always consider a location that will deliver the maximum airflow.The Transmission Cooler can be mounted in multiple locations on your vehicle. Reference Diagram # 2 for possible cooler positions. #1 is the ideal location, #2 is second best and #4 being the last choice. 
[Compatibility] Universally designed to fit most vehicles, this transmission cooler connects seamlessly with 5/16” ID lines. Prior to installation, please ensure there is adequate space for the transmission oil cooler
[Robust Cooling Device] This trans cooler is constructed from premium aluminum alloy, offering a high-quality structure with an overall size of 15.66” by 10” and a compact profile of 0.75”, with Metal Mounting Bracket
[Hose Specifications] Our hoses are engineered from top-grade CPE for the transmission cooler, maintaining an operational pressure at 145psi and withstanding peak pressures up to 900psi, operating efficiently across temperatures ranging from -40℉ to 257℉
[Efficient Thermal Regulation] Featuring specially designed fins, this trans cooler ensures optimal heat extraction from transmission fluid, while facilitating air circulation over the fins to enhance the cooling process as the fluid circulates through the transmission oil cooler
Dedicated Customer Service & Protection: We stand behind our product with attentive customer support. Should any issues arise, our responsive team is ready to assist you. Prioritize peace of mind with our reliable oil cooling solution
